PixResolve

Prepare your photo for print

Choose your paper size and PPI, keep the whole photo with borders or adjust the crop, then review the exact pixels before downloading.

  1. 1Choose photo
  2. 2Size & improve
  3. 3Review & download
Your photo1 photo

Add your photo.

Drag a photo here to get started.

JPEG, PNG, WebP, HEIC, HEIF or AVIF · Up to 20 MiB each

Prepare photo for print: size and PPI

To prepare a photo for print, match its pixels to the physical size you want on paper. Pixels per inch (PPI) describes how many image pixels occupy one printed inch. Multiply each side in inches by the chosen PPI: a 4 × 6 inch print at 300 PPI needs 1200 × 1800 pixels. For centimeters, divide by 2.54 before multiplying. Rotate the paper and those width and height values swap.

This calculation describes size, not a guarantee of sharpness. A soft, compressed or out-of-focus photo can have enough pixels and still make a disappointing print. PPI also differs from a printer’s dots per inch (DPI), which describes its output dots. Use the image resolution requested by your print lab rather than copying the DPI number printed on a printer box.

Print size to pixel dimensions
Paper sizePPIPixels (width × height)
4 × 6 in3001200 × 1800
5 × 7 in3001500 × 2100
8 × 10 in3002400 × 3000
A4 (21 × 29.7 cm)300≈ 2480 × 3508
4 × 6 in150600 × 900

A4 values are rounded to whole pixels. Adobe explains the same relationship between pixels, print size and PPI.

Choose the paper size for your photo first

Start with the destination: a 5 × 7 inch frame, a 4 × 6 photo album, or an A4 sheet. Check the frame’s visible opening if it has a mat; part of the paper may sit behind it. Ask a print service about its accepted sizes and any trimming allowance before arranging details close to an edge. A file’s current pixel dimensions do not tell you which frame to buy.

Pick a preset above, or open Custom for a different width and height in inches or centimeters. Turn paper switches portrait and landscape; Rotate photo changes the image itself. Open More settings to choose PPI and export format. Keep the intended paper size fixed while you compare crops so you can see what will actually fit.

Print size and PPI settings for a 4 × 6 in photo, with a whole-photo preview and white borders
Choose the paper size, then check the fit and PPI. Example photo: Family Group, The Metropolitan Museum of Art, public domain.

Crop to a ratio, or add white borders

A 4 × 6 print has a 2:3 ratio; an 8 × 10 print has a 4:5 ratio. When the photo has different proportions, you must either leave space or remove part of the image. Keep whole photo fits every edge inside the paper and adds borders where needed. The borders are part of the exported canvas, so the overall file still matches your selected paper size.

Fill the paper crops the edges to cover the sheet. Drag the preview to move the crop, or use the position controls in More settings. Check heads, hands, dates and writing near the margins before continuing. White borders are the straightforward choice for a photo print. Transparent borders are available with PNG for layouts that need transparency; confirm how your print service handles them.

Export at the exact pixel dimensions

The download uses the pixel width and height calculated from your paper size and PPI, rounded to whole pixels. It also records the selected print density. Review & download shows the dimensions before export. JPEG is a practical choice for photographs when your lab accepts it; PNG avoids JPEG compression and supports transparent borders. Choose the format your destination requests.

Single-photo local preparation and export require a registered account, with no subscription or Credits, provided the source has enough pixels for the chosen layout. That does not include AI enlargement. AI upscaling and enhancement here require Pro and Credits; batch edits also require Pro. Check the current plans and pricing before choosing paid work. Save a separate print copy and keep your original unchanged for future crops or sizes.

If your photo has fewer pixels than the print needs

The tool flags insufficient pixels and blocks review and export for that layout. It does not silently stretch the photo or start an AI job. You can choose a smaller print, reduce PPI if your printer’s requirements allow it, use an original with more pixels, or request upscaling. A smaller fitting preset is offered when one is available.

Upscale for this size checks an available result against the chosen paper and fit. You must explicitly confirm the quoted Credit price before the photo is uploaded for processing. If no available result is large enough, change the size or source. After processing, the tool checks the returned pixels again before allowing export.

Raising PPI alone does not create real detail: with a fixed pixel count, it only makes the stated print size smaller. Holding paper size fixed while raising PPI instead increases the required pixels. AI enlargement estimates additional pixels and may change faces or lettering. Inspect those details before accepting the result; sufficient dimensions do not prove a faithful reconstruction.

Print-ready sizing vs fixed 2K/4K/8K upscaling

Use this page when the final paper size matters. A 5 × 7 inch print at 300 PPI needs 1500 × 2100 pixels, not a generic 4K label. This workflow combines that size with your chosen crop or borders and exports the resulting canvas. A portrait and a landscape print need the correct dimensions in the correct order.

Use Resolution when you want a larger source with the same proportions for several possible uses. Its fixed 2K, 4K and 8K targets concern the longest edge; they do not select a paper ratio or physical print size. You can upscale the photo before printing, then bring the result here for final sizing. Check the quoted output: free Resolution results target up to 1.5 megapixels and may not meet your print’s needs.

Before you print: check at 100%

Open the downloaded file at 100% zoom in an image viewer to inspect faces, lettering, thin edges and repeated textures. Compare any AI result with the original. Also view the whole composition to catch an awkward crop or uneven margins. Screen zoom is a detail check; it is not a reliable preview of physical paper size.

To personalize a photo with a single inscription, edit text in an image before preparing the final print size. Check the replacement words, spacing and background at 100%, then bring the saved image back here for sizing.

In the print dialog, choose the matching paper and Actual size or 100% scaling. Fit to page and borderless modes may resize or crop your carefully prepared layout. Check the printer preview and lab instructions, including color and trimming requirements. Print one test copy before ordering several or committing to a large format.

How many pixels do I need for a 4 × 6 photo?

At 300 PPI, use 1200 × 1800 pixels, or 1800 × 1200 for landscape. At 150 PPI, use 600 × 900. These are the full paper dimensions; white borders can occupy some of that area when you keep the whole photo.

Is 300 PPI always necessary?

Follow your print lab’s specification first. The tool offers 150, 200 and 300 PPI. A lower setting uses fewer pixels at the same paper size, but fine detail may look softer up close. Check a small test print before choosing a lower setting for a large order.

Can I change 72 PPI to 300 PPI to fix a blurry photo?

Changing only the PPI value adds no detail. With the same pixel count, the stated print dimensions become smaller. Keeping the original paper size at 300 PPI instead requires more pixels; enlargement must be a separate, deliberate choice.

Why do I see white borders around my photo?

The photo and paper have different proportions. Keep whole photo preserves every edge and leaves unused space as borders. Choose Fill the paper to remove the borders by cropping, then move the crop to protect faces and other important details.

Do I need Pro to download a print-sized photo?

A registered account can export a single photo locally without Pro or Credits when it already has enough pixels. AI upscaling and enhancement within this print workflow require Pro and a confirmed Credit price. Batch edits also require Pro. Signing up does not include unlimited AI enlargement.